Information about the semiconductor FPF2411 manufactured by Fairchild Semiconductor can be found here.
Part Number: FPF2411BUCX_F130
Top Marking: QR
Function: Bi-Directional Switch
Package: 12-Ball Wafer-Level Chip-Scale Package (WLCSP)
Manufacturers: Fairchild Semiconductor
Image and Pinouts
Description
FPF2411 is a 6 V / 6 A-rated bi-directional load switch, consisting of a slew-rate-controlled, low-onresistance, P-channel MOSFET switch with protection features. The slew-rate-controlled turn-on characteristic prevents inrush current and the resulting excessive voltage droop on the input power rails. The input voltage range operates from 2.3 V to 5.5 V. Bi-directional switching allows reverse current from VOUT to VIN. The switching is controlled by active-LOW logic input the ONB pin. The FPF2411 is capable of interfacing directly with low-voltage control signal General-Purpose Input / Output (GPIO). The FPF2411 is available in 12-bump, 1.235 mm x 1.625 mm Wafer-Level Chip-Scale Package (WLCSP) with 0.4 mm pitch. Ordering Information Part Number Top RON (Typ.).
Some text files in the PDF file
Features
Capability: 6 V Low RON – 10 mΩ at 5 V at PWRA or PWRB (Typ.) – 12 mΩ at 3.8 V at PWRA or PWRB (Typ.) Maximum Current Capability: 6 A (Bi-Directional) Ultra-Low IQ:<1 µA Active LOW Control Pin 2 ms Long Slew Rate Reverse Current Blocking (RCB) during OFF Robust ESD Capability: – 5 kV HBM, 2 kV CDM – 15 kV Air Discharge – 8 kV Contact Discharge Under IEC 61000-4-2 Applications Smartphone / Tablet PC Mobile Devices Portable Media Devices. Mark at 3.8 VIN FPF2411BUCX_F130 QR 12 mΩ Output Discharge No ONB Pin Functionality Package Active LOW 12-Ball Wafer-Level Chip-Scale Package (WLCSP), 3 x 4 Array, 0.4 mm Pitch, 250 µm Ball
© 2015 Fairchild Semiconductor Corporation FPF2411 • Rev. 1.7 www.fairchildsemi.com FPF2411 — IntelliMAX™ 6 V / 6 A-Rated Bi-Direction Switch with Slew-Rate Control Application Diagrams 2.3~5.5V PWRA PWRB FPF2411 CIN ON OFF ONB GND + COUT 2.3~5.5V PWRB PWRA FPF2411 CIN ON OFF ONB GND + COUT SYSTEM Figure 1. High-Level Application Diagrams PWRA PWRB 1uF FPF2411 ON OFF ONB GND 1uF BATTERY PTVS Note: Adding a PTVS such as RDP3101B is recommended at PWRB node in order to avoid device damage from surge or equivalent stress. Figure 2. Battery Isolation Application © 2015 Fairchild Semiconductor Corporation FPF2411 • Rev. 1.7 2 www.fairchildsemi.com FPF2411 — IntelliMAX™ 6 V / 6 A-Rated Bi-Direction Switch with Slew-Rate Control Block Diagrams PWRA RCB PWRB ONB CONTR [ … ]
Preview 2
FPF2411 PDF Datasheet
Information related to components
FPF2411 - - Fairchild |
AP2411 - 2.0A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH - Diodes
|