What is STK4162II?
This is AF Power Amplifier (Split Power Supply) (35W + 35W min / THD = 0.4%). A amplifier is an electronic circuit that amplifies or increases the voltage of an electrical signal. The input signal is usually a low-level voltage, and the output signal is a higher-level voltage with the same waveform as the input signal. |
[PDF] Complete Technical Details can be found in the
STK4162II datasheet
provided at this page.Summary in PDF FileOrdering number EN2886A Thick Film Hybrid IC STK4162II AF Power Ampli er Split Power Supply 35W 35W min THD 0 4 Features The STK4102II series STK4162II and STK4101V series high grade type are pin compatible in the output range of 6W to 50W and enable easy design Small sized package whose pin assignment is the same as that of the STK4101II series Built in muting circuit to cut off various kinds of pop noise Greatly reduced heat sink due to substrate temperature 125 C guaranteed Excellent cost performance Package Dimensions unit mm 4040 STK4162II Speci cations Maximum Ratings at Ta 25 C Parameter Maximum supply voltage Thermal resistance Junction Temperature Operating substrate temperature Storage temperature Available time for load short circuit Symbol VCC max j c Tj Tc Tstg ts VCC 30V RL 8 f 50Hz Po 35W Conditions Ratings 45 2 1 150 125 30 to 125 2 Unit V C W C C C s Recommended Operating Conditions at Ta 25 C Parameter Recommended supply voltage Load resistance Symbol VCC RL Conditions Ratings 30 8 Unit V SANYO Electric Co Ltd Semiconductor Business Headquarters TOKYO OFFICE Tokyo Bldg 1 10 1 Chome Ueno Taito ku TOKYO 110 JAPAN 70997HA ID 9078MO TS No |
Datasheet Download (PDF) |
[ Detailed Data ] |
Q: What is a voltage amplifier, and how does it work? A: A voltage amplifier is an electronic circuit that increases the amplitude of an input voltage signal. It does this by using active or passive components to amplify the input signal, making it stronger and increasing its voltage level. The output voltage of the amplifier is proportional to the input voltage, and the amplification factor is determined by the circuit design. Q: What are the types of voltage amplifiers? A: There are many types of voltage amplifiers, including operational amplifiers (op-amps), transistor amplifiers, vacuum tube amplifiers, and integrated circuit (IC) amplifiers. Each type of amplifier has its unique design and application. Q: What is the gain of a voltage amplifier? A: The gain of a voltage amplifier is the ratio of the output voltage to the input voltage. It is typically expressed in decibels (dB) or as a numeric ratio. Q: What is the frequency response of a voltage amplifier? A: The frequency response of a voltage amplifier is the range of frequencies that the amplifier can amplify without significant distortion or attenuation. It is determined by the circuit design and the characteristics of the active and passive components used. Manufacturers : Sanyo  |
SANYO STK4162II AMPLIFIER AF Power Amplifier (Split Power Supply) (35W + 35W min / THD = 0.4%) |
Datasheet STK4162II PDF DownLoad ( SANYO ) |