What is TDA-7384?


This is 4 x 35W QUAD BRIDGE CAR RADIO AMPLIFIER.

A amplifier is an electronic circuit that amplifies or increases the voltage of an electrical signal. The input signal is usually a low-level voltage, and the output signal is a higher-level voltage with the same waveform as the input signal.


[PDF] Complete Technical Details can be found in the TDA-7384 datasheet provided at this page.

Summary in PDF File


TDA7384A 4 x 35W QUAD BRIDGE CAR RADIO AMPLIFIER HIGH OUTPUT POWER CAPABILITY 4 x 40W 4 MAX 4 x 35W 4 EIAJ 4 x 25W 4 14 4V 1KHz 10 4 x 22W 4 13 2V 1KHz 10 LOW DISTORTION LOW OUTPUT NOISE ST BY FUNCTION MUTE FUNCTION AUTOMUTE AT MIN SUPPLY VOLTAGE DETECTION LOW EXTERNAL COMPONENT COUNT INTERNALLY FIXED GAIN 26dB NO EXTERNAL COMPENSATION NO BOOTSTRAP CAPACITORS PROTECTIONS OUTPUT SHORT CIRCUIT TO GND TO VS ACROSS THE LOAD VERY INDUCTIVE LOADS OVERRATING CHIP TEMPERATURE WITH SOFT THERMAL LIMITER LOAD DUMP VOLTAGE BLOCK AND APPLICATION DIAGRAM Vcc1 Vcc2 FLEXIWATT25 ORDERING NUMBER TDA7384A FORTUITOUS OPEN GND REVERSED BATTERY ESD DESCRIPTION The TDA7384A is a new technology class AB Audio Power Amplifier in Flexiwatt 25 package designed for high end car radio applications Thanks to the fully complementary PNP NPN output configuration the TDA7384A allows a rail to rail output voltage swing with no need of bootstrap capacitors The extremely reduced components count allows very compact sets 470 F ST BY N C OUT1 IN1 0 1 F OUT1PW GND OUT2 IN2 0 1 F OUT2PW GND OUT3 IN3 0 1 F OUT3PW GND OUT4 IN4 0 1 F AC GND 0 47 F SVR 47 F D99AU1018 100nF MUTE OUT4PW GND TAB S GND October 1999 1 9 TDA7384A ABSOLU

Datasheet Download (PDF)


[ Detailed Data ]


Q: What is a voltage amplifier, and how does it work?
A: A voltage amplifier is an electronic circuit that increases the amplitude of an input voltage signal. It does this by using active or passive components to amplify the input signal, making it stronger and increasing its voltage level. The output voltage of the amplifier is proportional to the input voltage, and the amplification factor is determined by the circuit design.

Q: What are the types of voltage amplifiers?
A: There are many types of voltage amplifiers, including operational amplifiers (op-amps), transistor amplifiers, vacuum tube amplifiers, and integrated circuit (IC) amplifiers. Each type of amplifier has its unique design and application.

Q: What is the gain of a voltage amplifier?
A: The gain of a voltage amplifier is the ratio of the output voltage to the input voltage. It is typically expressed in decibels (dB) or as a numeric ratio.

Q: What is the frequency response of a voltage amplifier?
A: The frequency response of a voltage amplifier is the range of frequencies that the amplifier can amplify without significant distortion or attenuation. It is determined by the circuit design and the characteristics of the active and passive components used.



Manufacturers : ST Microelectronics

STM - TDA-7384 Datasheet PDF

STM TDA-7384 AMPLIFIER

4 x 35W QUAD BRIDGE CAR RADIO AMPLIFIER

More Search







Datasheet TDA-7384.PDF DownLoad ( STM )


[ Home ]