What is LA17?


This is 10 to 1000 Mhz TO-8 Cascadable Limiting Amplifier.

A amplifier is an electronic circuit that amplifies or increases the voltage of an electrical signal. The input signal is usually a low-level voltage, and the output signal is a higher-level voltage with the same waveform as the input signal.


[PDF] Complete Technical Details can be found in the LA17 datasheet provided at this page.

Summary in PDF File


LA17 SMLA17 10 TO 1000 MHz TO 8 CASCADABLE LIMITING AMPLIFIER SYMMETRICAL CLIPPING GOOD EVEN ORDER SUPPRESSION MEDIUM OUTPUT LEVEL 10 dBm TYP HIGH THIRD ORDER INTERCEPT POINT 28 dBm TYP FAST PULSE RECOVERY TIME 50 NSEC Specifications Rev Date 3 02 Characteristic Frequency Small Signal Gain min Gain Flatness max Noise Figure max Power Output 1 dB comp min Output Limiting Level max Pin 20 dBm IP3 VSWR Input Output max DC Current 15 Volts max Typical 5 1100 MHz 11 5 dB 0 3 dB 5 8 dB 10 0 dBm 15 0 dBm 28 dBm 1 7 1 1 7 1 55 mA 10 1000 MHz 10 5 dB 0 5 dB 6 7 dB 7 0 dBm 16 0 dBm 1 9 1 1 9 1 57 mA 0 to 50 C Guaranteed 10 1000 MHz 9 5 dB 0 7 dB 7 2 dB 5 0 dBm 17 0 dBm 2 0 1 2 0 1 59 mA 54 to 85 C Measured in a 50 ohm system at 15 Vdc Nominal IP3 in the linear region range only Absolute Maximum Ratings Storage Temperature Maximum Case Temperature Maximum DC Voltage Maximum Continuous RF Input Power Maximum Short Term RF Input Power 1 minute max Maximum Peak Power 3 sec max S Series Burn in Temperature Case 62 to 125 C 125 C 17 Volts 23 dBm 400 mW 1W 125 C Thermal Data Vcc 15 Vdc Thermal Resistance jc Transistor Power Dissipation Pd Jun

Datasheet Download (PDF)


[ Detailed Data ]


Q: What is a voltage amplifier, and how does it work?
A: A voltage amplifier is an electronic circuit that increases the amplitude of an input voltage signal. It does this by using active or passive components to amplify the input signal, making it stronger and increasing its voltage level. The output voltage of the amplifier is proportional to the input voltage, and the amplification factor is determined by the circuit design.

Q: What are the types of voltage amplifiers?
A: There are many types of voltage amplifiers, including operational amplifiers (op-amps), transistor amplifiers, vacuum tube amplifiers, and integrated circuit (IC) amplifiers. Each type of amplifier has its unique design and application.

Q: What is the gain of a voltage amplifier?
A: The gain of a voltage amplifier is the ratio of the output voltage to the input voltage. It is typically expressed in decibels (dB) or as a numeric ratio.

Q: What is the frequency response of a voltage amplifier?
A: The frequency response of a voltage amplifier is the range of frequencies that the amplifier can amplify without significant distortion or attenuation. It is determined by the circuit design and the characteristics of the active and passive components used.



Manufacturers : MA-Com

MACOM - LA17 Datasheet PDF

MACOM LA17 AMPLIFIER

10 to 1000 Mhz TO-8 Cascadable Limiting Amplifier

More Search







Datasheet LA17.PDF DownLoad ( MACOM )


[ Home ]