What is TDA1011?


This is 2 to 6 W audio power amplifier.

A amplifier is an electronic circuit that amplifies or increases the voltage of an electrical signal. The input signal is usually a low-level voltage, and the output signal is a higher-level voltage with the same waveform as the input signal.


[PDF] Complete Technical Details can be found in the TDA1011 datasheet provided at this page.

Summary in PDF File


INTEGRATED CIRCUITS DATA SHEET TDA1011 2 to 6 W audio power amplifier Product speci cation File under Integrated Circuits IC01 November 1982 Philips Semiconductors Product speci cation 2 to 6 W audio power ampli er TDA1011 The TDA1011 is a monolithic integrated audio amplifier circuit in a 9 lead single in line SIL plastic package The device is especially designed for portable radio and recorder applications and delivers up to 4 W in a 4 load impedance The device can deliver up to 6 W into 4 at 16 V loaded supply in mains fed applications The maximum permissible supply voltage of 24 V makes this circuit very suitable for d c and a c apparatus while the very low applicable supply voltage of 3 6 V permits 6 V applications Special features are single in line SIL construction for easy mounting separated preamplifier and power amplifier high output power thermal protection high input impedance low current drain limited noise behaviour at radio frequencies QUICK REFERENCE DATA Supply voltage range Peak output current Output power at dtot 10 VP 16 V RL 4 VP 12 V RL 4 VP 9 V RL 4 VP 6 V RL 4 Total harmonic distortion at Po 1 W RL 4 Input impedance preampli e

Datasheet Download (PDF)


[ Detailed Data ]


Q: What is a voltage amplifier, and how does it work?
A: A voltage amplifier is an electronic circuit that increases the amplitude of an input voltage signal. It does this by using active or passive components to amplify the input signal, making it stronger and increasing its voltage level. The output voltage of the amplifier is proportional to the input voltage, and the amplification factor is determined by the circuit design.

Q: What are the types of voltage amplifiers?
A: There are many types of voltage amplifiers, including operational amplifiers (op-amps), transistor amplifiers, vacuum tube amplifiers, and integrated circuit (IC) amplifiers. Each type of amplifier has its unique design and application.

Q: What is the gain of a voltage amplifier?
A: The gain of a voltage amplifier is the ratio of the output voltage to the input voltage. It is typically expressed in decibels (dB) or as a numeric ratio.

Q: What is the frequency response of a voltage amplifier?
A: The frequency response of a voltage amplifier is the range of frequencies that the amplifier can amplify without significant distortion or attenuation. It is determined by the circuit design and the characteristics of the active and passive components used.



Manufacturers : NXP Semiconductors

NXP - TDA1011 Datasheet PDF

NXP TDA1011 AMPLIFIER

2 to 6 W audio power amplifier

More Search







Datasheet TDA1011.PDF DownLoad ( NXP )


[ Home ]