LM35 Pinout – Precision Centigrade Temperature Sensor

LM35 is precision integrated-circuit temperature devices with an output voltage linearly-proportional to the Centigrade temperature.

Part number : LM35

Function : Precision Centigrade Temperature Sensor

Pakcage : TO-46, SO-8, TO-92, TO-220 Type

Manufacturer : National Semiconductor


LM35 Temperature Sensor

LM35 Pinout

LM35 pinout image

Product Information

The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Celsius (Centigrade) temperature. The LM35 thus has an advantage over linear temperature sensors calibrated in ˚ Kelvin, as the user is not required to subtract a large constant voltage from its output to obtain convenient Centigrade scaling. The LM35 does not require any external calibration or trimming to provide typical accuracies of ±1⁄4˚C at room temperature and ±3 ⁄4˚C over a full −55 to +150˚C temperature range. Low cost is assured by trimming and calibration at the wafer level. The LM35’s low output impedance, linear output, and precise inherent calibration make interfacing to readout or control circuitry especially easy.

Applications circuits

LM35 datasheet Temperature Sensors

Official Homepage : http://www.ti.com/product/LM35


1. Calibrated directly in ° Celsius (Centigrade)
2. Linear + 10.0 mV/°C scale factor
3. 0.5°C accuracy guaranteeable (at +25°C)
4. Rated for full −55° to +150°C range
5. Suitable for remote applications
6. Low cost due to wafer-level trimming
7. Operates from 4 to 30 volts
8. Less than 60 μA current drain
9. Low self-heating, 0.08°C in still air
10. Nonlinearity only ±1⁄4°C typical
12. Low impedance output, 0.1 W for 1 mA load

LM35 Datasheet PDF