IR2110 Datasheet – High And Low Side Driver

Part number : IR2110

Functions : High And Low Side Driver

Package information :  DIP 14 Pin Type

Manufacturer : IR Rectifier


IR2110 side driver


The IR2110 / IR2113 are high voltage, high speed power MOSFET and IGBT drivers with independent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. Logic inputs are compatible with standard CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 500 or 600 volts.


IR2110 pinout datasheet


1. Floating channel designed for bootstrap operation Fully operational to +500V or +600V
Tolerant to negative transient voltage dV/dt immune
2. Gate drive supply range from 10 to 20V
3. Undervoltage lockout for both channels
4. 3.3V logic compatible Separate logic supply range from 3.3V to 20V
Logic and power ground ±5V offset
5. CMOS Schmitt-triggered inputs with pull-down
6. Cycle by cycle edge-triggered shutdown logic
7. Matched propagation delay for both channels
8. Outputs in phase with inputs


IR2110 Datasheet PDF