LPC822 – 32-bit ARM Cortex-M0+ microcontroller

LPC822 Datasheet PDF learn more.

Part number : LPC822

Functions : This is a kind of semiconductor, 32-bit ARM Cortex-M0+ microcontroller.

Pin arrangement :

Package information :

Manufacturer : NXP

Image :

LPC822 Datasheet PDF

The texts in the PDF file :

LPC82x 32-bit ARM Cortex-M0+ microcontroller; up to 32 kB flash and 8 kB SRAM; 12-bit ADC; comparator Rev. 1 — 1 October 2014 Product data sheet 1. General description The LPC82x are an ARM Cortex-M0+ based, low-cost 32-bit MCU family operating at CPU frequencies of up to 30 MHz. The LPC82x support up to 32 KB of flash memory and 8 KB of SRAM. The peripheral complement of the LPC82x includes a CRC engine, four I2C-bus interfaces, up to three USARTs, up to two SPI interfaces, one multi-rate timer, self-wake-up timer, and state-configurable timer with PWM function (SCTimer/PWM), a DMA, one 12-bit ADC and one analog comparator, function-configurable I/O ports through a switch matrix, an input pattern match engine, and up to 29 general-purpose I/O pins. For additional documentation related to the LPC82x parts, see Section 18. 2.


and benefits  System:  ARM Cortex-M0+ processor (revision r0p1), running at frequencies of up to 30 MHz with single-cycle multiplier and fast single-cycle I/O port.  ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC).  System tick timer.  AHB multilayer matrix.  Serial Wire Debug (SWD) with four break points and two watch points. JTAG boundary scan (BSDL) supported.  MTB  Memory:  Up to 32 KB on-chip flash programming memory with 64 Byte page write and erase. Code Read Protection (CRP) supported.  8 KB SRAM.  ROM API support:  Boot loader.  On-chip ROM APIs for ADC, SPI, I2C, USART, power configuration (power profiles) and integer divide.  Flash In-Application Programming (IAP) and In-System Programming (ISP).  Digital peripherals:  High-speed GPIO interface connected to the ARM Cortex-M0+ IO bus with up to 29 General-Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors, programmable open-drain mode, input inverter, and digital filter. GPIO direction control supports independent set/clear/toggle of individual bits.  High-current source output driv [ … ]

LPC822 PDF File

Information related to components

Controller PCA84C822 - 8-bit microcontrollers for remote control transmitters - Nxp

NXP Semiconductors

Controller PCA84C822A - 8-bit microcontrollers for remote control transmitters - Nxp

NXP Semiconductors

This entry was posted in Uncategorized. Bookmark the permalink.